Wild Flower Garden Party - Elizabeth Craft Designs

 Hi and Welcome!!!

The Elizabeth Craft Designs flowers and everything designed by Angelica Turner are simply wonderful to create with and I absolutely love these wildflowers for a special friends birthday.

Create a 5 x 7" white card base. Diecut the Elegant Decorative Frame from white cardstock and adhere to the card front using glue and dimensional tape for the center panel. Stamp the sentiment on 1 3/4 x 3/4" white cardstock with VersaMark Ink, cover with gold embossing powder and heat set. Ink the edges with Buttercup Ink.  

Diecut the Wildflowers and leaves from Soft Finish cardstock, color, stamp the flowers using he Flower Centers stamps and shape. Add prills to the flower centers and adhere the flowers and leaves as shown. Adhere the sentiment over the stem using dimensional squares.

Cut the Garden Party cardstock 4 7/8 x 6 7/8",ink the edges and adhere to the inside of the card.

Either hand write a message inside or add a stamped sentiment.

Elizabeth Craft Products Used:

2120 - Elegant Decorative Frame

CS393 - Easter Greetings Stamp

PSF144 - Soft Finish Cardstock

CS330 - Flower Centers

2096 - Wildflower 1

C019 - Garden Party Cardstock

Other Products Used: White Cardstock, Archival Inks: Buttercup, Olive and Coastal Coral, Prills, VersaMark Ink, Gold Embossing Powder, Heat Gun, Hot Glue Gun, Dimensional Squares

Thank you so much for stopping by, I always enjoy your visit.

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Autumn Harvest Anniversary Wishes - Elizabeth Craft Designs

 Hi and Wecome!

I love this time of the year and I love creating autumn inspired cards. This one is for our special friends' anniversary.

Create a 6 x 6" rust colored card base. Using a deckle blade, cut two layers from Autumn Harvest cardstock, 5 3/4 x 5 3/4" and 5 1/2 x 5 1/2". Ink the edges, adhere the layers together and adhere to card front. Diecut the center from the Decorative Dimensional Basket, color using Archival Pebble Beach ink and adhere to the upper left side of the card front, 

Stamp the sentiment on the card front using a combination of Memento Coffee Crunch and Morocco inks.

Cut designer paper 5 3/4 x 5 3/4", ink the edges and adhere to the inside of the card.

Diecut the flowers and leaves from Soft Finish cardstock, color, shape and adhere the flower layers together using three graduated sized flowers to create each of the larger flowers and two the same size for the smaller flowers. Add prills to the flower centers and create a pretty floral cluster. Add a string bow to finish it off. 

Elizabeth Craft Designs Products Used:

PSF144 - Soft Finish Cardstock

C027 - Autumn Harvest Cardstock

2182 - Florals 32

2221 - Decorative Dimensional Basket

CS405 - Floral Branches and Sentiments

Other Products Used: Rust Colored Cardstock, Prils, String, Hot Glue, Memento Inks: Bambo Leaves, Coffee Crunch, Morocco and Peanut Brittle, Archival Ink: Pebble Beach

Thank you so much for stopping by! I love your visits!!!

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Pretty in Pink Poinsettias - Elizabeth Craft Designs

Hi and Welcome! 

Another Christmas card is done! These poinsettias from the Festive Holly Collection by Angelica Turner turned out so pretty in pink. Now to figure out who I'm going to give this card to. Hmmmm.

Create a 6 x 6" tent fold card base from white pearlescent cardstock. Cut a 5 3/4 x 5 3/4" layer from pink pearlescent cardstock and a 5 1/2 x 5 1/2" layer from the white pearlescent cardstock. Emboss the white layer using a pretty Christmas embossing folder. Adhere the layers together and adhere to the card front. 

Stamp the sentiment on the white 3/4" cardstock using VersaMark ink, cover with silver embossing powder and heat set. Dovetail one end, use a score tool and score board and score the edges of the sentiment.

Cut a 5 3/4 x 5 3/4" panel and adhere to the inside of the card.

Diecut the poinsettias from pink pearlescent card stock, the holly leaves from white pearlescent cardstock and the pine leaves from silver cardstock. Shape the poinsettias and layer two of the same size flowers and one that's one size smaller offset to create each poinsettia and add stamens to the centers. Shape the holly leaves and pine leaves and create a floral cluster. Adhere to the card front using hot glue. Shape the sentiment and adhere next the flowers. To finish it off, add some Swarovski crystals.

Elizabeth Craft Designs Products Used:

2269 - Poinsettia

2270 - Winter Greenery

CS417 - Festive Holly Sentiments

Other Products Used: Pearlescent White and Pink Cardstock, Embossing Folder, VersaMark Ink, Silver Embossing Powder, Heat Gun, Stamens, Swarovski Crystals

Thank you so much for stopping by, I always enjoy your visits.

Till we meet again, please stay safe and be well!

Have a beautiful day!!!

Crafty Hugs, 🤗🤗🤗

Janet

50th Anniversary Floral - Elizabeth Crafts Designs

Hi and Welcome!

There's nothing like flowers for a special anniversary and these paper flowers by Angelica Turner will last forever. 

Create a 5 x 7" white card base and layer with a gold panel 4 3/4 x 6 3/4" and a white embossed panel 4 1/2 x 6 1/2". Adhere the layers with dimensional tape. 

Stamp the sentiment from Floral Branches and Sentiments stamp set with VersaMark on white cardstock 7/8 x 2 3/4", cover with gold embossing powder and heat set. I then added gold numbers from my stash. Layer onto a gold layer that's slightly larger to create a pretty gold border. Adhere to the front of the card as shown using dimensional tape. Cut 4 x 6" white cardstock for the inside and use a decorative corner punch on all four corners. 

Diecut two same size flowers from Soft Finish Cardstock to create each beautiful blossom. Color the petals using Memento Lilac Posies ink, shape, adhere together and add pearl stamens to the centers. Diecut the leaves using the same cardstock, color using Memento Bamboo Leaves ink and shape. Adhere the flowers and leaves to the card front as shown using hot glue. 

Elizabeth Craft Designs Products Used: 

2181 - Florals 31

PSF144 - Soft Finish Cardstock

CS405 - Floral Branches and Sentiments

Other Products Used: White and Gold Cardstock, Embossing Folder, Gold Numbers, VersaMark, Gold Embossing Powder, Pearl Stamens, Corner Punch, Memento Lilac Posies and Bamboo Leaves Inks, Dimensional Tape, Hot Glue

 

Autumn Birthday - Elizabeth Craft Designs

 Hi and Welcome!

Sorry I'm late this week. My Hubby is in the hospital and time just got away from me. I created this colorful simple birthday card for him to try to cheer him up as he had to celebrate his birthday in a hospital bed.  

Using the largest Ornamental Frame Die, cut a card base from cream cardstock. Using the same die, cut from the Autumn Harvest cardstock. Diecut the decorative Ornament Frame from the same cardstock and adhere the layers together. Using glue and dimensional squares, adhere to the card front.

Use the largest Ornamental Frame die again to cut designer paper for the inside of the card.

Use the Autumn Foliage dies to cut the leaves from the beautiful Autumn Harvest cardstock. Ink the edges, shape a little bit and adhere to the card front using hot glue. Stamp the sentiment on the designer paper, use a corner punch on all four corners and ink the edges. Adhere using dimensional squares. Make a small bow and adhere above the sentiment.

Elizabeth Craft Designs Products Used:

2249 - Ornamental Frame

2183 - Autumn Foliage

C027 - Autumn Harvest Cardstock 

CS393 - Easter Greetings Stamp  

Other Products Used: Cream Cardstock, Orange Jute, Corner Punch, Distress Oxide Inks: Vintage Photo, Rusty Hinge and Iced Spruce, Dimensional Squares, Hot Glue

Thank you so much for stopping by. I always appreciate your visits.

Till we meet again, please stay safe and be well. 

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗 

Janet  

Festive Wreath - Elizabeth Craft Designs

 Hi and Welcome!

I get so excited when I can get some Christmas cards done early and I love how this one turned out. I used the Festive Holly Collection by Angelica Turner to create this festive wreath card. 

Create a 6 x 6" white card base. Cut the following layers: 5 3/4 x 5 3/4" green cardstock, 5 1/2 x 5 1/2" red cardstock and 5 1/4 x 5 1/4" white cardstock. Emboss the white layer and adhere all layers to card front. 

Stamp sentiment on white cardstock, fussy cut and add to bottom right of the card front. 

Cut green layer and red layer and adhere to inside of card.

Cut wreath base several times from green cardstock and adhere together. Diecut the leaves, color and layer on the base as shown. Cut the berries and bow from red cardstock. Add 3D crystal lacquer to the berries, let dry and adhere to the wreath. Assemble the bow, cover with Wink of Stella and adhere to wreath using dimensional dots. Adhere the wreath to the card front using dimensional dots and the card is finished.

Elizabeth Craft Designs Products Used:

2271 - Holiday Wreath

CS417 - Festive Holly Sentiment

PSF144 - Soft Finish Cardstock

Other Products Used: Red, Green and White Cardstock, Embossing Folder,

Archival Inks: Olive, English Ivy and Black. Brilliance Moonlight White Ink, 3D Crystal Lacquer, Wink of Stella, Dimensional Dots.

Thank you so much for stopping by, I always enjoy your visit.

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Christmas Eclipse - Elizabeth Craft Designs

 Hi and Welcome!

Today I'm sharing an eclipse card using the beautiful Festive Holly Collection by Angelica Turner. I really love making Christmas cards and this collection makes it so easy.

Create a 5 x 7" cream card base. Cut the following layers 4 3/4 x 6 3/4" from green designer paper, 4 1/2 x 6 1/2" from metallic gold cardstock, 4 1/4 x 6 1/4" from red designer cardstock, and 4 x 6" from metallic gold cardstock. Adhere the layers together and adhere to the card front. Cut two 3 3/4 x 5 3/4" pieces of designer paper that are exactly the same. Cut the second one every 1/4" and adhere every other strip to the first design using dimensional strips as shown. Stamp sentiment on cream cardstock using VersaMark, cover with gold embossing powder and heat set. Diecut along with a gold mat layer using the Layered Labels Die set. Adhere to the top of the card front. 

Cut two layers for the inside: 4 3/4 x 6 3/4" from gold cardstock and 4 1/2 x 6 1/2" from green designer paper and adhere to inside of card.

Cut Robin from Soft Finish Cardstock, color and assemble.

Cut the poinsettia and leaves from colored cardstock, color the poinsettia with gold ink and the leaves with Moonlight White ink which is very frosty. Shape and assemble the poinsettia and add gold stamens. Adhere the flower, leaves and robin to the card front using dimensionals and glue.

Elizabeth Craft Designs Products Used:

2082 - Layered Labels

2269 - Poinsettia

2270 - Winter Greenery

2272 - Festive Robin

C034 - Festive Holly Cardstock

PSF144 - Soft Finish Cardstock

CS417 - Festive Holly Sentiments

Other Products Used: Cream, Red, Green and Gold Cardstock, VersaMark, Gold Embossing Powder, Gold Stamens, Heat Gun, Various Inks, Dimensional Strips and Dimensional Dots.

Thank you so much for stopping by, I truly enjoy your visits.

Till we meet again, please stay safe and be well.

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗 

Janet

 

Festive Star - Elizabeth Craft Designs

 Hi and Welcome!

Today I'm sharing an 8 x 8" card which is definitely larger than i usually create. However, sometimes it's good to step out of our comfort zone as I had so much fun creating it. I used the fabulous Festive Holly collection by Angelica Turner for Elizabeth Craft Designs. 

Create an 8 x 8" white card base. Cut the following layers: red 7 3/4 x 7 3/4", green 7 1/2 x 7 1/2" and white 7 1/4 x 7 1/4". Using a holly embossing folder, emboss the white layer. Adhere the layers together and adhere to the card front.

Cut another red and green layer and adhere to the inside of the card. 

Diecut Festive Star from red cardstock, assemble and spray with Sheer Shimmer Craft Spray - Sparkle. Diecut the star elements again from white cardstock adhere together and cover with chunky glitter. Stamp the sentiment on white cardstock, dove tail the ends and adhere with dimensional dots. 

Diecut Pine needle branches from green cardstock and cover with frost white ink. Diecut poinsettia from red cardstock, shape, assemble, spray with Sparkle craft spray and add gold prills to the center. Adhere all the elements together as shown using hot glue and adhere to the card front. 

Elizabeth Craft Designs Products Used: 

2269 - Poinsettia

2270 - Winter Greenery

2273 - Festive Star

CS417 - Festive Holly Sentiment

Other Products Used: Red, Green and White Cardstock, Embossing Folder, Sheer Shimmer Craft Spray - Sparkle, Prills, White Frost Ink, Hot Glue Gun

Thank you so much for stopping by, I'm so grateful for your visit.

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Blue Butterfly - Elizabeth Craft designs

 Hi and Welcome!!!

This is a card I created for a friend who loves blue butterflies. I used Angelica Turner's Florals 31 along with Art Journal Specials Ornate Butterfly.

Create a 5 x 7" card base from white cardstock. Cut 2 layers from white cardstock 4 3/4 x 6 3/4" and 4 1/2 x 6 1/2". Color the edges of th larger one using 

Archival Manganese Blue ink. Using an embossing folder, dry emboss the smaller layer.

Adhere the two layers together with glue, then adhere to the card base using dimensional tape. 

Cut white cardstock 4 x 6", punch the corners using a butterfly corner punch. Adhere to the inside of the card on top of a white 4 3/4 x 6 3/4" colored with Manganese Blue ink.

Diecut the butterfly base and decorative layer from soft finish cardstock. Color the base and the center of the butterfly, shape with fingers, adhere together and adhere to the top of the card front.  

Diecut flowers, leaves and foliage from soft finish cardstock, color, shape, add two same size flowers together offset, add prills to the centers and adhere flowers and foliage under the butterfly using hot glue.

Elizabeth Craft Designs Products Used: 

2181 - Florals 31

2183 - Autumn Foliage 

2112 - Ornate Butterfly

PSF144 - Soft Finish Cardstock

Other Products Used: White Cardstock, Embossing Folder, Archival Inks: Olive, Leaf Green, English Ivy, and Manganese Blue, Seas the Day Prills, Hot Glue Gun, Dimensional Tape.

Thank you so much for stopping by! I always enjoy your visit!

Till we meet again, please stay safe and be well.

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Festive Lighted Lantern - Elizabeth Craft Designs

 Hi and Welcome!

Today I'm sharing a beautiful lantern I created using the dies from the Festive Holly collection by Angelic Turner. These lanterns can be made in so many different colors with so many different flowers for all seasons and occasions. 

Diecut all the pieces for the Festive Lantern from Tim Holz metallic cardstock - Onyx. Cut pearlescent vellum to add to the inside of all the diecuts. Be sure to cut a "door" in the back panel. Fold and adhere all the panels together. I actually deepened all the score lines by placing the panels on my scoreboard and using the bone folder. That made it much easier to fold everything. 

Diecut the flowers, the holly leaves and the pine branches from deep red, green and silver cardstock using the Poinsettia and Winter Greenery dies. Shape, adhere flowers together, add silver centers and adhere everything to the front of the lantern. Sponge a little dries white glue on the flowers and sprinkle with some chunky glitter to create a snowy look.   

Tie a deep red bow and add a brad or a button to the center and adhere to the top of the lantern. 

To finish it off, add a battery operated candle inside. Look how pretty it looks all lit up. I love it! 

Elizabeth Craft Designs Products Used: 

2269 - Poinsettia

2270 - Winter Greenery

2275  Festive Lantern

Other Products Used: Tim Holz Metallic Cardstock-Onyx, Dark Red, Dark Green and Silver Cardstock, Bow, Snowy glitter, Pearlescent Vellum, Hot Glue, Brad, Battery Operated Candle. 

Thank you so much for stopping by! It's always so good to see you!

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet 

Blue Christmas - Elizabeth Craft Designs

 Hi and Welcome!

Today I created an elegant easel card with beautiful blue poinsettias Using the Festive Holly Collection designs by Angelica 'Turner. Why blue? Because when you're creating, your flowers can be any color you want them to be. Besides, blue is my favorite color lol.I love how the white and silver are the perfect background for my blue poinsettias. 

Using the largest Festive Ornate Frame, cut a white card base. Fold the top in half to create the easel and cut another panel to add to the folded piece. Using the decorative dies from the same set, cut from white and silver cardstock. Adhere the silver behind the white, slightly offset to create a silver shadow. Adhere the decorative diecuts to the card base as shown.  

The center diecuts are adhered using dimensionals.

Cut holly leaves from Soft Finish Cardstock, color and shape.Cut poinsettias from blue cardstock, shape, assemble, and add stamens to the centers. Cut the Festive Greenery from silver cardstock and lightly shape. Create a floral cluster on the front of the card base.   

Stamp sentiment on white cardstock using VersaMark, cover with silver embossing powder and heat set. Cut sentiment and sliver layer using Layered Labels. Adhere to inside to create a stop for the easel and add three more poinsettias with holly leaves around the sentiment.

Glitter the poinsettias and leaves using chunky glitter. 

Elizabeth Craft Designs Products Used: 

2269 - Poinsettia

2270 - Winter Greenery

2274 - Festive Ornate Frame

CS417 - Festive Holy Sentiments

PSF144 Soft Finish Cardstock

2082 - Layered Labels

Other Products Used: White Cardstock, Silver Cardstock, Blue Cardstock, Stamens, VersaMark, Silver Embossing Powder, Heat Gun, Hot Glue

Thank you so much for stopping by, I really look forward to your visits.

Till we meet again, please stay safe and be well! 

Have a beautiful day! 

Crafty Hugs, 🤗🤗🤗

Janet

Joyous Poinsettia - Elizabeth Craft Designs

 Hi and welcome!

Today I have another Christmas card created with the gorgeous Festive Holly Collection by Angelica Turner. It's simple, yet elegant with a hint of gold.

Create a 7 x 5" cream card base. Cut gold cardstock 2x 6 7/8 x 4 7/8" and Festive Holly cardstock Ink the edges of the designer cardstock and adhere one to one of the gold and adhere to the card front using dimensional tape.                                                                                        

Cut center of Festive Ornate frame from Festive Holly cardstock and gold cardstock. Adhere together slightly offset and adhere to the right side of the card front. Stamp the sentiment on the designer cardstock using VersaMark ink, cover with gold embossing powder, heat set and die cut using the circle dies from the Festive Star set. Cut a decorative circle from gold cardstock using the same set, adhere together and adhere to the center of the frame using dimensionals.   

Cut the poinsettias, holly leaves and winter greenery from colored cardstock, shape, assemble and add stamens to the flower centers. Add a little white pearlescent ink to the leaves and greenery and brush the flowers with gold Wink of Stella.

Create a pretty arrangement with the poinsettias, leaves and greenery and adhere to the left side of the card front using hot glue.  

Stamp the sentiment and beautiful image and from the Festive Holly Sentiments on the second piece of designer paper using VersaMark ink, cover with gold embossing powder and heat set. Adhere to the second piece of gold cardstock and adhere to the inside of the card. 

Elizabeth Craft Designs Prducts Used: 

2269 - Poinsettia

2270 - Winter Greenery

2273 - Festive Star

2274 - Festive Ornate Frame

CS417 - Festive Holly Sentiments

C034 - Festive Holly Cardstock

Other Products Used: Red, Cream, Gold and Green Cardstock, Stamens, White Pearlescent Ink, Vintage Photo Distress Oxide Ink, VersaMark Ink,  Gold embossing Powder, Heat Gun, Hot Glue, Gold Wink of Stella.

Thank you so much for stopping by, I love "seeing" you.

Till we meet again, please stay safe and be well. 

Have a beautiful day!!!

Crafty Hugs, 🤗🤗🤗

Janet