Wednesday, June 28, 2023

Heartfelt Creations - Sweet Christmas Birdies

 Hi and welcome!

My Christmas card today has a pretty decorative edge and sweet little birdies. 






Instructions: Card size is 7 x 5”. Score and fold 7 x 10” white cardstock at 5” on the long side to create card base. Using the Filigree Accents Die, cut the bottom edge of the card front. Using the same die, cut again from 7 x 5” Luxe Gold cardstock. Adhere the gold behind the white slightly offset to create a golden shadow. Cut Luxe Gold cardstock 7 x 2 7/8” and white cardstock 7 7/8 x 2 3/4”. Dry emboss the white using any embossing folder and adhere to the gold. Then adhere to the card front as shown. Cut Luxe Gold cardstock 7 x 4 7/8” and 7 x 2 7/8” and cut sheet 9B 6 7/8 x 4 3/4 and 6 7/8 x 2 3/4”. Adhere the designer paper to the Luxe Gold pieces and adhere to the inside of the card. Cut white cardstock 6 3/4 x 2 5/8”, stamp the sentiment ‘Wishing You A Wonderful Christmas” from the Christmas Lantern Cling Stamp set using Real Red ink, use a corner snowflake punch to create the decorative corners and adhere to the inside of the card.

Stamp the images from the Festive Berry & Birdies Cling Stamp set on watercolor paper using Archival Olive ink and color using Zig Clean Color Real Brush Markers – Blue Gray, Warm Gray 2, Carmine Red, Light Green and Pale Green. Stamp the image with the three birdies a second time using Archival Jet Black ink and color just the birds with the Zig markers on this one. Diecut the images a second time from white cardstock and adhere to the stamped images using dries clear adhesive. Diecut the three colored birdies, cut two more times from white cardstock, adhere together and adhere to the full diecut image. Lightly shape, spray with Sheer Shimmer Craft Spray – Sparkle and adhere Minnie Pearl prills to the image with the single bird. When dry, adhere to the card front using dimension squares and hot glue.

Stamp the poinsettias and holly leaves from the Poinsettia & Holly Clusters Cling Stamp set on Real Red and Garden Green cardstock using Real Red and Garden Green ink, diecut using the coordinating dies and shape using the coordinating mold. Using a stylus from the Deluxe Flower Shaping Kit, cup the centers and adhere two flowers together and one holly using dries clear adhesive to create the poinsettias. Using a paint brush, add diluted dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Add Heart of Gold Prills to the flower centers and adhere the flowers to the card front as shown using hot glue.

You can find a list of all the products used on this card in the Heartfelt Creations Gallery. Please be sure to also visit the Heartfelt Creations Blog to see all of the absolutely gorgeous projects created by the fabulous Design Team.

Thank you so much for stopping by, I really appreciate you!

Till we meet again, please stay safe and be well. 

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Wednesday, June 21, 2023

Heartfelt Creations - A Christmas Lantern

 Hi and welcome!

Today I'm sharing another card with an aperture using the beautiful Festive Christmas Collection. 







Instructions: Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create card base. Cut Luxe Silver cardstock 2x at 4 7/8 x 6 7/8” and sheet 9B from the Festive Christmas Paper Collection 2x at 4 3/4 x 6 3/4”. Ink the edges of the designer papers with Real Red ink. Adhere one Luxe Silver piece and one designer paper to the card front using removable tape. Using the plain oval from the Simply Classic Oval Frame Die, cut an aperture in the card front. It will usually only cut through two of the layers but will leave a deep impression on the cardstock so you can remove the two mat layers, lay the die on the impression on the card base and run through the diecutting machine one more time. You will wind up with perfectly aligned layers to adhere permanently with dries clear adhesive. Adhere the second set of mat layers to the inside of the card. Using the third, fourth and fifth largest Simply Classic Oval Frame Dies, cut from white cardstock and Luxe Silver cardstock. Cut the corner pieces from the same set 2x each from white cardstock and 2x each from Luxe Silver cardstock. Sponge the white diecuts with dries clear adhesive and sprinkle with Rajni Chawla’s Crystal Clear adhesive. When dry, adhere to the silver diecuts slightly offset and adhere to the card front as shown using dimensional dots.

Stamp the image from the Christmas Lantern Cling Stamp set on heavy white cardstock using Memento Tuxedo Black ink and color using Stampin’ Blends Markers – Light and Dark Granny Apple green, Light and Dark Real Red, Light and Dark Smokey Slate, Dark Daffodil Delight and Light So Saffron. Diecut using the coordinating die. Diecut again from white cardstock and from Luxe Silver Cardstock. Adhere the white behind the white for stability, then adhere the silver slightly offset. Lightly shape using the Deluxe Flower Shaping Kit and adhere to the card front over the aperture using hot glue.

Stamp the ‘Merry Christmas’ from the Christmas Holly Accents Cling Stamp Set on white cardstock using Real Red Ink and diecut using the coordinating die. Diecut again from white cardstock and adhere the layers together using dries clear adhesive. Adhere to the inside of the card so that it shows through the bottom of the opening.

Sponge the lantern and the sentiment with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent glitter.

Check out the heartfelt Creations Gallery and you'll see all the products I used on this card. Please be sure to also visit the Heartfelt Creations Blog to see all of the magnificent projects created by the fabulous design team.

Thank you so much for stopping by, I really appreciate you!

Till we meet again, please stay safe and be well. 

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet

Wednesday, June 14, 2023

Heartfelt Creations - Festive Christmas Accents

 Hi and welcome!

Today we're debuting the gorgeous Festive Christmas Collection. I just love all the little birdies in this one. 







Instructions: Card size is 5 x 7”. Score and fold 10 x 7” white cardstock at 5” on the long side to create card base. Cut Luxe Silver cardstock 2x at 4 7/8 x 6 7/8” and sheet 5B from the Festive Christmas Paper Collection 2x at 4 3/4 x 6 3/4”. Ink the edges of the designer papers with Archival Sky Blue ink. Adhere one Luxe Silver piece and one designer paper to the card front using removable tape. Using the plain oval from the Fancy Classic Oval Frame Die, cut an aperture in the card front. It will usually only cut through two of the layers but will leave a deep impression on the cardstock so you can remove the two mat layers, lay the die on the impression on the card base and run through the diecutting machine one more time. You will wind up with perfectly aligned layers to adhere permanently with dries clear adhesive. Adhere the second set of mat layers to the inside of the card. Using the third and fourth largest Fancy Classic Oval Frame Dies, cut from white cardstock and Luxe Silver cardstock. Adhere together slightly offset and adhere to the card front using dimensional dots.

Stamp the images from the Christmas Holly Accents Cling Stamp Set on watercolor paper using Archival Olive, Jet Black and Vermillion inks, Color using Zig Clean Color Real Brush markers - Pale Green, Light Green, Carmine Red, Wine Red, Cornflower Blue, Yellow and Ochre and a water brush. Stamp the images with the birds two times, once in Olive and once in Jet Black. Color the leaves on the one stamped in Olive and color the birds on the one stamped in Jet Black. Diecut all images using the coordinating dies, diecut the images a second time from white cardstock one more time and adhere to the back of the stamped images. Diecut the birds four more times and adhere for dimension. Lightly shape the images using the Deluxe Flower Shaping kit and spritz with Sheer Shimmer Craft Spray – Sparkle. Adhere the images to the frame and the inside of the card as pictured using dimensional dots and hot glue.

Add some extra sparkle by randomly dabbing the images, the frame, the card front and the inside with dries clear adhesive and sprinkle with Crystal Ultrafine Transparent glitter.

You can find all the products used on my card in the Heartfelt Creations Gallery. Please be sure to also visit the Heartfelt Creations Blog to see all of the gorgeous projects created by the fabulous Design Team.

I really appreciation you stopping by. Thank you!

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet



Wednesday, June 7, 2023

Heartfelt Creations - June Wedding

 Hi and welcome!

June is always such a business month with graduations and weddings,

My card today is a pretty fun fold wedding card.







Instructions: Card size is 4 1/4 x 5 1/2”. Score and fold 5 1/2 x 8 1/2” pink cardstock at 2 1/8” and 4 1/4” on the long side. The 4 1/4” fold is a valley fold and the 2 1/8” fold is a mountain fold. Cut white cardstock 4 x 5 1/4”, 1 7/8” x 5 1/4” and 3 1/4 x 4 3/4”. Cut Luxe Gold Cardstock 4 1/8 x 5 3/8", 2 x 5 3/8”, 3 3/8 x 4 7/8”. Using VersaMark ink, stamp the white 4 x 5 1/4” piece with the ‘For the Bride and Groom’ sentiment from the Classic Wedding Wishes Cling Stamp set, cover with Ranger Gold Gold Embossing Powder and heat set using the Heat It Tool. Adhere that to the Luxe Gold 4 1/8 x 5 3/8” piece and adhere to the inside of the card. Stamp the image from the Feathery Floral Cling Stamp set on the white 1 7/8” x 5 1/4” piece using Pink Peony ink. Adhere that to the Luxe Gold 2 x 5 3/8” piece and adhere to the left side of the card using dries clear adhesive.

Using a punch, cut an opening in the card base for the ribbon. Cut a 20” piece of pink iridescent ribbon, adhere to the card front, feed through the opening, wrap around the back and tie into a bow. Using an embossing folder of your choice, emboss the 3 1/4 x 4 3/4 white cardstock, adhere to the piece of 3 3/8 x 4 7/8” Luxe Gold cardstock, add dries clear adhesive to the left side only and adhere to the card front as shown.

Stamp the sentiment ’Celebrate’ from the Celebrate Love Sentiments Cling Stamp set on white cardstock using VersaMark ink, cover with Ranger Gold Gold Embossing Powder and heat set using the Heat It Tool. Diecut using the smallest Slim lattice Oval Die. Cut again from Luxe Gold cardstock, adhere together slightly offset and adhere to the top of the card front using dries clear adhesive and foam dots.

Stamp the Classic Rose flowers on Deluxe Flower Shaping Paper using Pink Peony ink, color using Rose Madder ink, diecut using the coordinating dies and shape using the Groove Golf Tool. Using four same size flowers to create the larger rose and two same size flowers to create the small roses. Pierce the center of two of the smallest flowers and insert a Bridal Bouquet stamen in each. Stamp the Lush Lilac Flowers in Olive, color with the same ink and diecut using the coordinating die. Adhere these to the back of the roses to use as a calyx.

Stamp the Leafy Accent leaves on Deluxe Flower Shaping Paper using Archival Olive ink, color with the same ink, diecut using the coordinating die, add more ink to the edges of the leaves and shape using the Groove Golf Tool and the Deluxe Flower Shaping kit.

Using a paint brush, add diluted dries clear adhesive to the flowers and leaves and sprinkle with Rajni Chawla’s Crystal Clear glitter. Cut the leaves apart and adhere the flowers and leaves to the card front using hot glue.

Get the rest of details in the Heartfelt Creations Gallery. Please be sure to also visit the Heartfelt Creations Blog to see all of the absolutely gorgeous projects created by the fabulous design team.

I really appreciate you stopping by, thank you!!! 

Till we meet again, please stay safe and be well!

Have a beautiful day!

Crafty Hugs, 🤗🤗🤗

Janet